Most effective system for basement waterproofing is done with both HDPE sheet as a physical barrier and crystalline admixture as an integral waterproofing to fill the voids bonded with HDPE membrane and this system will be very effective through the life of the building and application warranty is provided For 10 Years

Most suitable form of preformed membrane for basement structure waterproofing with good puncture resistance. The membrane comprising of a HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer of sand to protect self-adhesive polymer layer, and this membrane is self-adhesive type, which stick to the concrete and forms part of the concrete and application warranty is provided for 10 Years.

One of the most durable preformed membranes having high elongation at breaking point and high tensile strength and great resistance to surface pressure, loosely laid and joints should be sealed with hot air gun. Water stopper should be fixed in the construction joints and suitable for making compartmentation and application warranty is provided for 10 Years.

Very effective type of waterproofing system for basements which works as integral waterproofing and reduces the waterproofing application time when used as admix with concrete. The concreting has to be very good when used as standalone system along with suitable water stops for construction joints and necessary grouting for concrete defects and application warranty is provided for 10 Years

The system has been in use for decades and also successful. The Product is having more than good elongation property and applied by butane flame torching at overlaps. Suitable for basements in high water table nearby by sea shore. The top surface of membrane will be granular surface and the system is normally protected screed before placing the reinforcement. The system is normally warrantied for a maximum of 10 years.

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

This is the most advanced waterproofing system, applied as a seamless waterproofing membrane and most suitable for all locations and very easy application in a building. At basements and for covered systems the coating is protected with a HDPE dimple sheet/Protection board. The elongation property of these membranes are very high between 200 to 2000 %.

Very effective type of waterproofing system for basements retaining wall on from positive and negative side. Which works as integral waterproofing and reduces the waterproofing application time when used as admix with concrete. The concreting has to be very good when used as standalone system along with suitable water stops/Crystalline mortar for construction joints, Tie rods/Concrete defects has to be treated with Crystalline mortar/High strength mortar after necessary grouting for concrete defects. Application warranty is provided for 10 Years.

Most suitable form of preformed membrane for basement waterproofing and for retaining walls where the waterproofing could not be done from the positive side and this membrane is self-adhesive type, which stick to the concrete and forms part of the concrete and joints and overlaps should be properly sealed and Construction joint should be treated with self-healing water stopper. Application warranty is provided For 10 Years,

It is a flexible, pre-formed high performance, cross laminated, HDPE carrier film with a tacky, self-adhesive rubberized asphalt compound specifically designed to adhere to cured concrete surfaces. All concrete defects should be properly treated with necessary grouting and high strength mortar before application. After fixing it should be protected with dimple board or any other protection layer to avoid the damages during back filling. Primer must be applied and allow to cure before sticking the membrane. Application warranty is provided for 10 Years.

Flexible Cementious Acrylic polymer based membrane elongation of 50%.Before application all concrete defects and construction joint should be treated with high strength mortar and grouting. Very cost effective system recommended for less water table areas.

One of the most durable preformed membranes having high elongation at breaking point and high tensile strength and great resistance to surface pressure, fixed in vertical surfaces using Randol’s and joints should be sealed with hot air gun and protected with dimple board and any other protection layer. Water stopper should be fixed in the construction joints and suitable for making compartmentation and application warranty is provided for 10 Years

The system has been in use for decades and also successful. The Product is having more than good elongation property and applied by butane flame torching at overlaps. Suitable for basements in high water table nearby by sea shore. The top surface of membrane will be granular surface and the system is normally protected screed before placing the reinforcement. The system is normally warrantied for a maximum of 10 years.

One of the most durable preformed membranes having high elongation and high tensile strength and great resistance to surface pressure, fixed in vertical surfaces using special adhesives and joints should be sealed with special tape and protected with dimple board and any other protection layer. Water stopper should be fixed in the construction joints and suitable for making compartmentation and application warranty is provided for 10 Years.

Flexible Cementious Acrylic polymer based membrane elongation of 50%.Before application all concrete defects and construction joint should be treated with high strength mortar and grouting. It should be protected with Plaster. If it’s STP or chemical reacted water recommend to apply Coal tar epoxy over the plastered surface.

Crystalline application works as integral waterproofing and create a crystal in to the concrete and fill the voids in the concrete. The concreting has to be very good when used as standalone system along with suitable water stops/Crystalline mortar for construction joints, Tie rods/Concrete defects has to be treated with Crystalline mortar/High strength mortar after necessary grouting for concrete defects. Curing is the very important part of crystalline system. Protection layer is not required. If it’s STP or chemical reacted water recommend to apply Coal tar epoxy over the surface after sufficent curing. Application warranty is provided for 10 Years.

This is the most advanced waterproofing system, applied as a seamless waterproofing membrane and most suitable for all locations and very easy application in a building. High chemical resistant PU was suggested for STP and waste water tanks. Protection layer is not required according to the selection of product.

This is the most advanced waterproofing system, applied as a seamless waterproofing membrane and application is not easy in tanks. Applied with skilled and applicators and application should be done in spray machine for most of the product from the manufactures. It should be protected after application of membrane.

Flexible Cementious Acrylic polymer based membrane elongation of 50%.Before application all concrete defects and construction joint should be treated with high strength mortar and grouting. It should be protected with Plaster. For drinking tanks recommend to apply Food grade epoxy over the plastered surface.

Crystalline application works as integral waterproofing and create a crystal in to the concrete and fill the voids in the concrete. The concreting has to be very good when used as standalone system along with suitable water stops/Crystalline mortar for construction joints, Tie rods/Concrete defects has to be treated with Crystalline mortar/High strength mortar after necessary grouting for concrete defects. Curing is the very important part of crystalline system. Protection layer is not required. For drinking tanks recommend to apply Food grade epoxy over the surface after sufficent curing. Application warranty is provided for 10 Years.

This is the most advanced waterproofing system, applied as a seamless waterproofing membrane and most suitable for all locations and very easy application in a building. Seamless solvent free food grade PU was suggested for Drinking water tanks. Protection layer is not required according to the selection of product.

This is the most advanced waterproofing system, applied as a seamless waterproofing membrane and application is not easy in tanks. Applied with skilled and applicators and application should be done in spray machine for most of the product from the manufactures. It should be protected after application of membrane.

A polyurethane coating is a polyurethane layer applied to the surface of a substrate for the purpose of protecting it. Layer of Protection means a device, system or action that is used to reduce the probability that a deviation from intended operation will result in a hazardous condition such as a release of toxic material, fire or explosion.

The polyurea is a synthetic polymer obtained from the reaction of a diamine with a diisocyanate, polymerization reaction is very similar to polyurethane one, but in case of polyurea, resulting link is a "urea", so it is called polyurea. Layer of Protection means a device, system or action that is used to reduce the probability that a deviation from intended operation will result in a hazardous condition such as a release of toxic material, fire or explosion.

APP and SBS membranes are different types of modified bitumen roofing membranes. To create these variations, other materials are combined with the modified bitumen base to produce different properties. Layer of Protection means a device, system or action that is used to reduce the probability that a deviation from intended operation will result in a hazardous condition such as a release of toxic material, fire or explosion.

Self-Adhering SBS Membranes Polyglass’ SBS (Styrene-Butadiene-Styrene) modified bitumen membranes use a proprietary formulation consisting of the highest quality asphalt, polymers, and modifiers. Layer of Protection means a device, system or action that is used to reduce the probability that a deviation from intended operation will result in a hazardous condition such as a release of toxic material, fire or explosion.

Acrylic Modified Cement is a special cement polymer that can be applied to any substrate, mainly concrete. Acrylic Modified Cement can be made to look like stone, pavers, tile or slate. Layer of Protection means a device, system or action that is used to reduce the probability that a deviation from intended operation will result in a hazardous condition such as a release of toxic material, fire or explosion.

A polyurethane coating is a polyurethane layer applied to the surface of a substrate for the purpose of protecting it. Layer of Protection means a device, system or action that is used to reduce the probability that a deviation from intended operation will result in a hazardous condition such as a release of toxic material, fire or explosion.

It is a self-cured component application which forms an impervious, tough, hard and abrasion resistant coating.

Water stoppers or water bars are flexible tape-like elements of a concrete structure that are embedded to prevent the passages of water or any fluids through concrete joints.

Micro concrete is a cement based coating which can be applied thinly (approximately 2-3mm) to a range of different surfaces including tile and wood.

PVC Water Stop are flexible Plastic strips which provide a physical barrier to Water at concrete joints, mostly in basements, Water retaining structures like Water tanks, Swimming pools, structural foundations & other below ground level constructions. Polyurethane sealants are used to seal joints in a wide variety of construction applications. Sikaflex® is Sika’s line of professional-grade polyurethane sealants that have outstanding adhesion compatibility, elasticity, durability, paintability and much more.

Polyurethane sealants are used to seal joints in a wide variety of construction applications. Sikaflex® is Sika’s line of professional-grade polyurethane sealants that have outstanding adhesion compatibility, elasticity, durability, paintability and much more. Jointing tape is used to reinforce corners or small holes in a variety of object